Commercial department +38-068-1774681Technical support +38-068-4048062
 
 
Self-washed automated filters of FSC series

Filters work on a principle of clearing of a filtering element as a return stream of water. Are issued for pressure 0,5...20 bar, optimal work at pressure from 2 to 10 bar.

Application area

Filters FSC series (patent number 81341, 12/27/2007) are versatile and can be used for flow rate up to 3400 m3/hr (up to DN 700 mm) anywhere passes on the size and installation conditions.

Filter FSC is recommended for use where there are restrictions on short-term flow rate water for washing and conditions consistent with its binding to the height and cart.

Typical application area of filters FSC: metallurgical, power, chemical, agricultural industry, municipalities.

Technical features

  • Filtering element has cells for gathering of firm pollution;
  • Automatic periodic washing of an element in the course of a filtration;
  • Continuation of a filtration of water at self-washing;
  • The insignificant expense of water on washing;
  • A rotating lattice of rough clearing with removal of large pollution without the filtration termination;
  • Non-failure operation at presence in water of large pollution;
  • Copes the programmed block of automatics and management;
  • The cleaner drive has special safety the device;
  • It-can be delivered with filtering grids with a cell to 50 microns.

Technical characteristics

Filter designation

Grid area, m2

Parameters of base filters with a grid of 1 mm

Maximum throughput (expense) of the filter, m3/hour, at the size of a cell of a grid of

Drive capacity, kw

Weight, kg

D, mm

Expense, m3/hour

3 mm

2 mm

1 mm

0,5 mm

FSC-200

0,16

200

170

290

230

170

145

0,18

250

FSC-300

0,38

300

410

680

550

410

340

390

FSC-400

0,63

400

680

1130

910

680

570

0,25

560

FSC-500

1,0

500

1100

1800

1440

1100

900

800

FSC-600

1,4

600

1500

2500

2020

1500

1250

0,37

1100

FSC-700

1,9

700

2100

3400

2750

2100

1700

1200

At will of the Customer the equipment with distinct from resulted in the present catalogue in parametres can be put.
Overall dimensions

Filter designation

Dy,mm

Dk,mm

L,mm

H,mm

H1,mm

H2,mm

dsl,mm

FSC-200

200

362

355

1150

620

795

76

FSC-300

300

462

416

1350

690

965

76

FSC-400

400

630

535

1500

720

1020

102

FSC-500

500

816

655

1650

750

1085

108

FSC-600

600

916

695

1740

760

1165

133

FSC-700

700

1000

745

1850

770

1250

133

Designs description

Filter FS (Patent of Ukraine 81341 dated 12/25/2007) has cylindrical filtering element, consisting of a cylindrical skeleton (in the form of the squirrel cage with set of longitudinal cells) and the corrosion-proof grid tense on it. Coaxially to an element the cleaner with one or two rectangular (under the form of cells of an filtering element) nozzles is established. At washing of the filter the cleaner rotates, and nozzles are consistently combined with filtering element cells. Thus nozzles, and through them and filter cells, consistently incorporate to the drain pipeline, the return stream of water through cells and grid sites in them which serially clears all cells and sites of a grid is created and takes out dust on plums.

Presence of a skeleton with cells favourably distinguishes the filter from filters of other manufacturers: the large pollution which are coming across in water, take places in cells, and do not stir to cleaner rotation, excepting its jamming.

Only filters FSC is no need to block water passage of filtered water to remove large particles, trapped coarse grid. They are removed by periodically opening the manual valve in the filter cleaning mode.

Forms-factors of filters FS does simple and technological its installation on the pipeline. This type of filters is most adapted for the organisation bypass lines (if necessary) on water.

Photo

To zoom in hover the cursor


 
Oceanmashenergo, Ltd phone/fax: +38-056-3729436 E-mail: oceanmas@infotd.dp.ua

All rights reserved 2004-2017
Design by AlexCh